LOADING 0%
// nav_menu.exe
Home Resume Blog Contact Order
English فارسی
~/blog / technology / wifi-5ghz-wall-penetration

Why Is 5 GHz Wi-Fi Faster but Worse at Crossing Walls?

Look at the name of your home Wi-Fi. Almost every router of the last few years broadcasts two networks: one ending in 2.4G and one in 5G. Your experience matches the spec sheet: the 5 GHz network is fast enough to make downloads dizzy, yet move one room away or close one door and the bars drain away. The 2.4 GHz network, meanwhile, is slow — but still answers from behind two walls.

None of this is an accident, and none of it is about router quality. It is a trade with physics, written into the laws of waves from day one: the higher the frequency, the more data capacity and the less penetration. In this post we trace exactly where that trade is signed — in bandwidth, in the wave's encounter with the wall, and in a 12 cm wavelength versus a 6 cm one. At the end we simulate the signal map of a whole apartment in Python for both bands, and in an interactive lab you light the apartment up yourself, band by band.

Why Is 5 GHz Wi-Fi Faster but Worse at Crossing Walls?

# The short answer: a two-way deal with physics

The one-line answer first: 5 GHz gets its speed from its bandwidth and its weakness from its wavelength. The 5 GHz band offers hundreds of megahertz of open space for data to live in — which is why it can run wide channels and multi-gigabit rates. But the same shorter wave loses a much bigger share of its energy passing through matter — any matter — and gives up on passing altogether more easily, preferring to bounce.
So 5 GHz is not "better"; it is more of a trade. Choosing between 2.4 and 5 GHz is really swapping the columns of one equation: you hand over speed and take range, or the other way around. To feel the swap, put the two networks side by side:
2.4 GHz

~12 cm wavelength; only 3 non-overlapping channels; 20/40 MHz channels; crosses two concrete walls; the most crowded band on Earth — microwaves, Bluetooth and dozens of neighbors' networks all live here

5 GHz

~6 cm wavelength; roughly 19 non-overlapping channels; 80/160 MHz channels; barely crosses one concrete wall; quiet and frictionless — but with a range several times shorter indoors

One common mix-up to kill right away: this 5G has nothing to do with 5G cellular. In Wi-Fi the number is a radio frequency; in mobile it is the fifth generation of the network. The names look alike because they both say "five", not because they do anything similar.

# The same thing that happens to your neighbor's music

You have already lived this phenomenon, even if you never named it. A neighbor plays loud music behind a wall: what crosses the wall and mercilessly reaches you is the bass — the boom-boom. What almost never crosses is the vocals and the treble. Sound is a wave too, and a wall does not treat long and short waves alike: a bass wave with a wavelength of several meters slips past the wall's mass; a treble wave with a wavelength of centimeters dies inside that same wall.
Wi-Fi obeys exactly the same rule — with one important difference: your neighbor's music is a mechanical wave traveling through air, while Wi-Fi is an electromagnetic wave, in the same family as light, radar and microwave heat. And the frequencies sit right in the middle of that story: the 2.4 GHz band has a wavelength of roughly 12 centimeters, the 5 GHz band roughly 6. So when you move from 2.4 to 5, you have effectively gone from "bass" to "treble" — and walls treat Wi-Fi the way they treated the music: they let the long wave through, and swallow the short one.
So we will open the two questions separately. First: why doesn't a higher frequency by itself make anything faster, yet opens room for speed? Second: when the wave meets the wall, what exactly is lost?

# Bits on a wave: what Wi-Fi actually transmits

Wi-Fi rides its data on a carrier wave. Your router generates a sine wave at a fixed frequency and encodes bits into tiny changes of the wave's amplitude and phase — the modem turns amplitude-and-phase pairs into "symbols", and each symbol carries several bits. The receiver recognizes the sine, strips off the phase and amplitude, and the bits come out. The whole magic of Wi-Fi is that one sentence: bits on a wave, a wave through air.
Now the question: why do we need two separate bands for this? Why doesn't everything just live on 2.4? The answer is radio regulation: frequencies are a finite resource — a parking strip. Part of the strip belongs to radio and TV, part to mobile, part to satellites, and only a few small "license-free" windows remain where anyone can transmit without a license. Wi-Fi lives on those windows.
The two main windows for home Wi-Fi are exactly the two bands you know. And the historically interesting part is that they opened fourteen years apart:
1
1997 — the first Wi-Fi on 2.4 — the ISM band, the same band microwave ovens (2.45 GHz) and cordless phones were allowed to use. The gray zone "for everyone" — cheap and frictionless
2
1999 — 802.11a on 5 GHz — a new, quiet band allowing wider channels and 54 Mbps; but its antennas were expensive and its range short — so it sat empty for years
3
2009 onward — 5 GHz comes home — with 802.11n and then 802.11ac (80 MHz channels), 5 GHz reached ordinary home routers and became the second network you see today
ⓘ
Why does Wi-Fi lag when the microwave runs? Because a microwave oven operates at 2.45 GHz — right in the middle of the 2.4 GHz Wi-Fi band. The oven works correctly and boils your food, but it leaks a tiny milliwatt-scale fraction; to a receiver standing nearby, that leak is a loud foreign noise across the whole band. 5 GHz Wi-Fi doesn't have this problem at all — it chose a different window to live in from the start.

# The speed secret: not the number 5 — the room it comes with

This is where most articles go wrong: they say "a higher frequency means more wave cycles per second, so more bits per second." That sentence is wrong. The number of wave cycles carries no bits by itself; bits ride on changes to the wave, not on its oscillations. A 2.4 GHz wave can be fast if it has room; a 5 GHz wave stays slow if it doesn't.
What actually creates speed is bandwidth — how many hertz of spectrum you were granted. Shannon's theorem ties them directly: a channel's capacity grows straight with its bandwidth (C = B·log₂(1+SNR)). Double the bandwidth, roughly double the capacity — that simple. And this is where the 5 GHz band wins: it has room.
The 2.4 GHz band offers only about 80 MHz of open space — which is why channels wider than 20 (sometimes 40) MHz never fit there, and why you only get 3 non-overlapping channels (1, 6, 11). The 5 GHz band, though, has several hundred megahertz of open space: 80 and 160 MHz channels fit comfortably, and you get roughly 19 non-overlapping channels. An 80 MHz channel means four times the data conveyor belt — and that multiplier is the speed you see in router specs: with 802.11n, one antenna stream on a 40 MHz channel tops out around 150 Mbps; on 802.11ac, the same single stream on an 80 MHz channel reaches 433 Mbps and beyond.
So physical justice holds: the number 5 doesn't grant speed; band width does — and wide open spectrum only exists at higher frequencies. Below 1 GHz everything belongs to radar, TV and mobile; there is simply no room for an 80 MHz channel. Speed sneaks in through the high-frequency window sideways.

# When the wave meets the wall: three fates

Now the other side of the deal: the wall. A radio wave that hits the surface of a material has three possible fates — and in all three, higher frequency means a heavier loss:
1
Transmission — part of the wave passes through the wall. But inside, the wave's electric field shakes the molecules, and every shake converts energy into heat. This "dielectric absorption" rises with frequency — the wall is effectively "thicker" for a 5 GHz wave
2
Reflection — another part never even enters; it bounces off the surface. The reflection coefficient of building surfaces rises with frequency: a 5 GHz wave "hits the wall" and turns back more than 2.4 does, like a card spinning off a cabinet door
3
Diffraction around the edge — a third part keeps its head down and smuggles itself past the edge of the wall and through the open door. This smuggling power depends on the ratio of obstacle size to wavelength: a 12 cm wave bends around edges far more willingly than a 6 cm one, and spreads through the home
And there is a loss that comes before any wall: even in open air, signal power falls with distance — the famous Free-Space Path Loss. The subtle part is that frequency works inside that law too: over the same distance, a 5 GHz signal drops about 7 dB more than 2.4. So 5 GHz takes a penalty before it even reaches the first wall.
To keep these losses from becoming hand-wavy, engineers measure them in decibels — a logarithmic unit: every 3 dB is half the power, every 10 dB a tenth. The table below shows the approximate attenuation of common household obstacles for both bands (numbers are ballpark and depend on thickness and construction details):
Obstacle Loss at 2.4 GHz Loss at 5 GHz In power terms
Ordinary glass 2–3 dB 5–8 dB down to 1/6 of power
Wooden door 3–4 dB 6–10 dB down to 1/10 of power
Drywall / plaster 3–4 dB 6–8 dB down to 1/6 of power
Brick wall 6–10 dB 12–16 dB down to 1/40 of power
Plain concrete 10–15 dB 20–25 dB down to 1/300 of power
Reinforced concrete (steel rebar) 15–20 dB 25–40 dB down to 1/10,000 of power
Now do the arithmetic for your own home. A typical router runs at 20 dBm — that is, 100 milliwatts. A laptop receiver needs about −70 dBm for good speed; out of your 90 dB budget, everything must be spent precisely. Those same 5 meters in open air take 54 dB (at 2.4) — 36 dB left. Add one concrete wall: about 12 dB at 2.4, about 22 dB at 5 GHz. Then a brick wall, then a wooden door... At 2.4, the laptop still shows bars at the far wall of the last room; at 5 GHz the budget is spent and the link has fallen to its lowest rate — or died.
ⓘ
Wi-Fi adapts itself to the loss. As the signal weakens, the first casualty is speed, not connection: the modem steps down from dense modulation schemes to simpler ones — low-bit symbols instead of high-bit ones — and "full bars but no speed" means you are standing in the middle of that ladder. The connection is the last thing to die; speed is the first.

# With Python: the signal map of an apartment

Words are done — to the code. We build a 16 × 8 meter apartment with two concrete walls (each with an open doorway) and a router in the living room. The model's arithmetic is simple: for every point in the home, received power = transmitter power minus free-space path loss over the straight-line distance, minus the loss of every wall the router-to-point line crosses. Then we compute it twice: once at 2412 MHz and once at 5180 MHz:
wifi_map.py
# wifi_map.py - signal strength map of an apartment, 2.4 GHz vs 5 GHz
# Model: received power = TX power - free-space path loss - losses of every wall crossed
import math
 
TX_DBM = 20.0             # ~100 mW, a typical home router
SENSITIVITY = -70.0       # below this, "good quality" is gone
CELL = 0.25               # meters per grid cell
W, H = 64, 32             # grid size -> a 16 m x 8 m floor plan
 
ROOM_W, ROOM_H = W * CELL, H * CELL   # 16 m x 8 m
 
# two concrete walls with door gaps: living room, then two rooms behind
WALLS = [
    {'x': 7.5,  'door': (6.5, 8.0)},   # wall 1: door at the bottom
    {'x': 12.0, 'door': (0.0, 1.2)},   # wall 2: door at the top
]
LOSS = (12.0, 22.0)      # dB lost crossing one concrete wall (2.4, 5 GHz)
 
ROUTER = (1.5, ROOM_H / 2)   # router 1.5 m from the left wall, centered
 
 
def fspl(d, f_mhz):
    """Free-Space Path Loss in dB (d in meters)."""
    if d < 0.1: d = 0.1
    return 20 * math.log10(d / 1000.0) + 20 * math.log10(f_mhz) + 32.44
 
 
def wall_crossings(x0, y0, x1, y1):
    """How many concrete walls the ray from (x0,y0) to (x1,y1) pierces."""
    n = 0
    for w in WALLS:
        if (x0 - w['x']) * (x1 - w['x']) < 0:
            t = (w['x'] - x0) / (x1 - x0)
            y = y0 + t * (y1 - y0)
            lo, hi = w['door']
            if not (lo <= y <= hi):
                n += 1
    return n
 
 
def rssi(px, py, f_mhz):
    d = math.hypot(px - ROUTER[0], py - ROUTER[1])
    p = TX_DBM - fspl(d, f_mhz)
    n = wall_crossings(ROUTER[0], ROUTER[1], px, py)
    return p - n * (LOSS[0] if f_mhz < 3000 else LOSS[1])
 
 
SHADE = '░░▒▒▓▓▓███'          # weakest -> strongest
 
 
def render(f_mhz):
    rows = []
    for gy in range(H):
        row = ''
        for gx in range(W):
            p = rssi((gx + 0.5) * CELL, (gy + 0.5) * CELL, f_mhz)
            k = int((p - (-92)) * (len(SHADE) - 1) / ((-30) - (-92)))
            row += SHADE[max(0, min(len(SHADE) - 1, k))]
        rows.append(row)
    return rows
 
 
def coverage(f_mhz):
    ok = total = 0
    for gy in range(H):
        for gx in range(W):
            total += 1
            if rssi((gx + 0.5) * CELL, (gy + 0.5) * CELL, f_mhz) >= SENSITIVITY:
                ok += 1
    return 100.0 * ok / total
 
 
for f, name in [(2412, '2.4 GHz'), (5180, '5 GHz')]:
    print(f'--- {name} ---')
    for row in render(f):
        print('|' + row + '|')
    print(f'area with good signal (>= {SENSITIVITY:.0f} dBm): {coverage(f):.0f}%')
    print()
Each character is a 25 cm square of floor, from ░ (almost nothing) to █ (strongest). The script's real output:
output.txt
--- 2.4 GHz ---
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|███████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|████████████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████████████▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|█████████████████████████████████████████▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|███████████████████████████████████████████▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
area with good signal (>= -70 dBm): 100%
 
--- 5 GHz ---
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|███████████████████████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|████████████████████████████████▓▓▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|████████████████████████████████▓▓▓▓▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|███████████████████████████████▓▓▓▓▓▓▓▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|███████████████████████████████▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░|
|██████████████████████████████▓▓▓▓▓▓▓▓▓▓▓▓▓▒▒▒▒▒░░░░░░░░░░░░░░░░|
area with good signal (>= -70 dBm): 75%
The router sits on the map's left, and the light fades left to right. At 2.4 GHz, the whole apartment is lit: even the last room, parked behind two concrete walls, is still inside the "good quality" zone, and coverage is 100 percent. The same apartment at 5 GHz: the living room is full of @ and %, but past the first wall the light dims, and past the second it is nearly dark — useful coverage falls to 75 percent. The two networks you see in your router settings, drawn as two maps of light.
ⓘ
To be honest: this model is deliberately simple. A real wave in a home does not travel only in straight lines: it reflects off ceilings, floors and side walls (multipath) and smuggles through open doorways — and those reflections help 5 GHz too. But every helping bounce pays the same frequency penalty itself; the simple model still shows the main storyline correctly: more absorption and reflection + weaker diffraction = the back room goes dark at 5 GHz.

# Lab: be the router

Your turn. The map of that same apartment with the same model lights up right here in your browser. Switch bands and watch the light redistribute; switch the wall material from drywall to concrete; and drag the router around to see how its position can flip the whole game:
wifi_lab.exe — interactive
The 16 × 8 m apartment is drawn right here with Canvas — the same model as the article's Python script.
Pick a band…
−30 dBm (strong)  →  −92 dBm and below (dead)
ⓘ
How to play: park the router against the shared wall of the back room and watch 5 GHz coverage come back to life — this is why the classic advice "put the router in the middle of the home" works: a 5 GHz wave pays for every extra meter and every extra wall, so the best router position is the point closest to the home's "hard geometry", not the corner behind a cabinet.

# So which one should you pick?

Now that you have seen both sides of the deal, the decision simplifies. The practical rule: 5 GHz for anything with line of sight to the router, 2.4 GHz for everything else. The office laptop sitting next to the router pulling 4K video: 5 GHz. The surveillance camera on top of the garage that sends one frame every few seconds: 2.4 GHz — it doesn't need speed, and you can't afford to sacrifice range. The same logic explains why almost every smart-home device (bulbs, plugs, sensors) deliberately speaks only 2.4 GHz: the manufacturer knows these devices may be installed behind a concrete wall or next to a breaker panel, and 5 GHz dies there.
Modern routers make the choice for you instead: both bands broadcast under one name, and the router moves each device between bands based on distance and signal quality — the behavior is called Band Steering. In effect, the router executes this article's table moment by moment, separately for every device.
And if you truly need 5 GHz coverage behind a strong wall, the answer is physical, not configurational: a second access point (or a mesh node) on the other side of the wall. No router setting can make a 5 GHz wave cross reinforced concrete — 25 to 40 dB means one three-hundredth to one ten-thousandth of the power, and no antenna gain fills that pocket. An Ethernet cable through the wall is the same old magic that still works.

# And then came 6 GHz

The story isn't over. Wi-Fi 6E added a third band: 6 GHz — wider channels and an even quieter space for higher speeds. And it takes no oracle to guess: its wall behavior is worse than 5 GHz. Same deal, higher price. The Wi-Fi industry, instead of breaking the law of physics, has started orbiting it: every higher frequency means more data space and less radius — and the fix is not settings but architecture: mesh routers, multiple access points, and antennas finding their one-by-one place in every room.
And the lesson bigger than Wi-Fi: wherever you see a "faster" that looks free in engineering, find where the trade is. 5 GHz is not fast "because it's better"; it is fast because it bought more bandwidth and paid with penetration. Recognizing these trades is the line between "randomly flipping settings" and "I know why the bars are full but the speed is gone".
takeaway.txt
Frequency is a deal with physics: the higher it goes, the more data and the less penetration.

# Related Posts